Once you line up the template (or level) to the drawer, you’ll need to make a small mark so you know where to drill when you move the template. Photo Credit: “ pencil” by Tim Taylor is licensed under CC BY 2.0 (Another idea is to bring the screws from your old knobs with you to the hardware store because those are already the right length that you’re looking for.) Tell an employee that you want the same size screw diameter, but longer or shorter length, depending on the thickness of your drawer and the depth of the screw hole in the handles. If that’s the case, just measure the thickness of your drawer and go to your local hardware store with your pulls and the screws that it came with. But keep in mind that depending on the thickness of your drawers or cabinet doors, you may need longer or shorter screws than what is provided. Most of the time, when you buy the handles, the necessary screws come with them. Obviously, you’ll need the actual handles (aka pulls) and screws. Or you can even make a homemade template using a paper, pencil, and ruler. And it even comes with a standard drill bit. You can also use a level if you don’t want to spend a few bucks on the template. It saves you from doing some measuring and basic math, which is quite the perk for someone like me. This handy template will make your life so easy while you install your new handles! As a side note, it also works for cup pulls and knobs. Most likely it will be a Phillips head (aka cross-head) tip. Then you’ll also want the drill bit that fits the type of screws you’ll be using. You’ll probably want a standard drill bit to make a pilot hole. Okay, if you hate the backplate look (how could you?!), then here’s what you should do to fill those holes in! Just follow the steps below, and you should be good to go! ( Click here for ideas about how to choose the rights cabinet hardware.) Necessary Tools: Also, keep in mind that backplates look great on drawers, but be more careful when it comes to cabinet doors. For option one, read the rest of the article. For option two, go the easy route and use a backplate! You can buy handles with backplates already attached or you can buy backplates that match any handle style you have. See the two photos below as examples. So you have two main options: 1) fill the holes or 2) cover the holes. The last thing you want is an ugly hole right behind your beautiful new cabinets. Knobs only require one hole and handles require two. But if you’re going to switch knobs to handles or pulls, then it can get a little more complicated (still pretty easy, though). And you can use the same hole, so there’s not much work to be done. If you decide to replace your current knobs with different knobs, the process is usually pretty self-explanatory. And that tiny piece of metal can make quite the difference in style. For example, it may not be realistic to replace your cabinets, but it’s pretty easy to replace just the hardware. Luckily, there are a few things we can do to update the looks in our homes without completely remodeling. Remodeling your home every few years is expensive. The problem is that it can be pretty unrealistic to change the look of your home any time styles change. Kitchen Pull-Out and Built-In Trash Cans.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |